Licensed Aircraft Engineer II
To carry out routine maintenance tasks and defect rectification of aircraft as per company and associated regulatory procedures.
Carry out aircraft maintenance and servicing tasks in compliance with manufacturer and safety procedures. Ensure that assigned zones/aircraft are maintained as per latest revisions of approved authority Technical Publications such as Aircraft documentation, Technical Notices, Quality Notices, and Engineering Procedures Manual etc. Ensure that personal approvals/licences are valid and applicable to aircraft types. Ensure that safety briefings are carried out with your team prior to each task.
Ensure all off-aircraft tasks i.e. spares handling, robberies, hold items etc. are handled in compliance with company procedures and that the associated paperwork is complete to ensure full transparency.
Determine if tooling/equipment used is serviceable and appropriate for the task and use specialised tooling where required. Ensure that trouble shooting procedures/tools used for fault rectification are carried out in a cost effective and efficient manner.
Carry out component changes as necessary as part of trouble shooting process and/or as directed by immediate supervisor. These should be done in accordance with AMM, IPC or other manufacturer/vendor documentation to complete the task.
Ensure that all activities performed are carried out in accordance with all safety rules and regulations and in adherence to company procedures, highlighting an deficiencies/requirements (whether for aircraft or hangar use) through the effective use of reporting tools in support of the overall quality improvement process and actively participate in propagating and enhancing the Group safety culture.
Ensure all work locations are kept clean and excellent housekeeping conditions are maintained.
Maintain effective communication with Colleagues including Managers and Senior Engineers to ensure a seamless flow of information and to highlight any potential operational issues.
Ensure that relevant reports are related to service delays, incidents and accidents are completed in detail including the identification of issues that led to the event so that rectification can be sought through short term maintenance planning.
Manage the performance of staff using performance review process and system. Ensure SMART goal setting, interim/annual reviews and development plans are in place for assigned staff members in accordance with company procedures.
Attend training/recurrent modules as required to enhance skills and comply with CAR 145 requirements. Ensure approvals are obtained within 3.5 months of completion of course.
Be available for deployment anywhere within the EK operation, including diversionary airfields to assist in recovery process of an AOG (Aircraft on Ground) and/or aircraft component manufacturer facilities to act as an EK rep to oversee final assembly Emirates aircraft, supervise outsource maintenance work and assist in the acceptance/delivery process.
Specific Line Maintenance/Aircraft Cabin Maintenance
Ensure prompt attendance to all allocated aircraft checks, arrival/departures with the intent to maximize the opportunities during ground time and avoid operational delays/disruptions.
Specific Base Maintenance
Ensure that the EK General Repair Manuals are followed to carry out cost effective and approved repairs to cabin components
Specific Emirates Flight Training Academy
Directly contribute to safety and airworthiness through certification of maintenance activity for the Academy fleet of 27 aircraft.
Oversee the final assembly of EFTA new aircraft and assist in the acceptance and delivery process. Supervise any outsourced maintenance work.
Ensure aircraft are checked as expected to protect the flight operations of EFTA from any safety violations.
Qualifications & Experience
Degree or Honours (12+3 or equivalent)
Degree in Engineering – Aeronautical subjects/Mechanical/Avionics/Electronic/Tech Engineering or Maintenance Engineering Licence
Engineering.Maintenance Control 8+ Years
2+ Years as a certifying staff
Must have UAE GCAA/ICAO Type II/EASA Part 66 license endorsed with 2 aircraft types.
Fully conversant with Air Legislation and legal matters that relate to the operation and maintenance of aircraft to international standards.
Must have UAE GCAA/ICAO Type II/EASA Part 66 license rated in B1.1 and/or B1.2 categories, and/or B2 category, in addition to company approvals. Rating in at least 1 EFTA aircraft type desirable, plus 9+ years’ experience in aviation maintenance.
Safety Sensitive Role: Yes
Salary & Benefits
Join us in a management role and enjoy an attractive tax-free salary. On top of our generous travel benefits, including discounted flights and hotel stays around the world, this managerial role also has an excellent leave and healthcare package. That’s on top of transport benefits, life insurance and more.